YIJIA Vacuum Skin Packaging Machine

Vacuum Packaging Machines

YIJIA Vacuum Skin Packaging Machine

Heated skin film conforms to product contours for food and tray display packs

Catalog reference YJ-0129 covers vacuum skin packaging configurations with 350 or 760 mm film widths, reference pump rates of 20 or 100 m³/h and PLC touchscreen control. Confirm each value against the selected configuration and actual samples.

Catalog reference: YJ-0129 SKU: YJ-0129
Catalog reference YJ-0129 with different film-width configurations350 / 760 mm film widthsPLC touchscreen control304 stainless steel and hard aluminumFor food tray skin packaging
Request quote All products
Information to prepare Container size, material, mouth diameter and sample photos Sealing material Target capacity Voltage / region Auxiliary process

Check skin-pack samples and film compatibility

Review the product profile, support tray and skin film together. Similar-looking materials can behave differently during sealing.

  • Provide maximum product height, edge profile and support-tray dimensions; identify sharp corners or bones that could puncture the film.
  • Record skin-film grade, thickness and the tray surface material; check the material pairing specified by their suppliers.
  • Use samples at the intended temperature and moisture condition to examine film contact, bubbles and flange contamination; save photographs from consistent angles.
  • Describe chilled, frozen or transport conditions and agree the method and timing for leak, peel and appearance checks.

The SealerWeb references below support further configuration comparisons; they do not identify the same model as this catalog record. Confirm suitability and specifications against samples and equipment documentation.

Compare further packaging configurations on SealerWeb Discuss skin-pack sample requirements with SealerWeb

Equipment summary

Selection summary

Catalog reference YJ-0129 covers vacuum skin packaging configurations with 350 or 760 mm film widths, reference pump rates of 20 or 100 m³/h and PLC touchscreen control. Confirm each value against the selected configuration and actual samples.

Product Description

Vacuum skin packaging heats the upper film and draws it around the product contour and base tray. The tray, skin film, product height and tooling must work together; film width alone does not establish package compatibility.

YJ-0129 is this website’s catalog reference. The listed 350 and 760 mm values describe film-width configurations, not model suffixes. Check pump rate, power supply, dimensions, temperature range and weight for each configuration separately instead of combining the largest values into one machine specification.

Confirm the configuration against tray layout, product height and target cycle, then test the actual product, tray and film for conformity and sealing results. Listed specifications are catalog references and do not replace confirmation of the selected configuration.

Buyer selection points

Package objectConfirm product form, container material, opening size, capacity and leakage risk.
Sealing requirementConfirm film or foil material, sealing temperature, sealing strength and appearance requirements.
Line outputChoose semi-automatic, fully automatic or integrated-line solutions by target output per minute or hour.
Downstream integrationFilling, conveying, coding, labeling, inspection and collecting modules can be evaluated as needed.

FAQ

How should the 350 and 760 mm configurations be reviewed?

Match the actual tray layout, product height and skin film, then check film width, pump rate, power supply and dimensions for that configuration. YJ-0129 is this page’s catalog reference.

Can every tray be used directly?

No. Tray, skin film, product height and tooling must be matched and tested together.

Similar equipment

Related Products